Home Amp Parts Tremolo Parts Electronics Hardware Knobs Nuts_Saddles Screws
Pickguards Schematics Strings Accessories Tools Bass Parts Tubes
Bridge Parts Tuners Used Parts Necks Bodies Special Order


Marshall Amp Parts

Marshall Pots 24mm | Marshall Pots 16mm | Korg Pots 11mm Square | Marshall Bias Pots | Marshall Amp Knobs

Marshall Jacks & Jackplates | Marshall Switches | Marshall Amp Logos | Marshall Cabinet Parts | Marshall Power Supply Parts

Marshall Ohm Selectors | Marshall Output Transformers | Marshall Power Transformers | Marshall Filter Chokes

Other Amplifier Parts Available

General Amplifier Parts | Fender Amplifier Parts | Ampeg Amplifier Parts | Vox Amplifier Parts

How to Identify Marshall Amplifier Pots
  • We recommend always opening the amp and verifying part values and sizes before ordering
  • Physical size measurements refer to the diameter of the pot casing
  • Values on pot have a letter associated with it - A=Audio , B=Linear , C=Audio
  • 24mm (approx 15/16") - used on JCM800 and older models
  • 16mm (approx 5/8") - used on JCM900, Solid State

    • ALWAYS DRAIN CAPS BEFORE OPENING!!
    Plug in Speakers. With sound coming thru speakers turn power off with standby still on. Wait 5 minutes. Unplug & open.

    REMEMBER: If You Are Not A Qualified Technician, Don't Take Chances With Electricity!

    Model Product Description Price . . Purchase
    Marshall 24mm Pots     Top of Page
    GN22KA24-MAR Marshall PC mount Audio Pot
  • 22K Audio 24mm (A22K)
  • Nut included
    Marshall 24mm Pot Dimensions
    		• $ 3.99   Marshall PC mount Audio/Log 22k Pot
    larger image
    GN22KL24-MAR Marshall PC mount Linear Pot
  • 22K Linear 24mm (B22K)
  • Nut included
    Marshall 24mm Pot Dimensions
    		• $ 3.99   Marshall PC mount Linear 22k Pot
    larger image
    GN220KL24-MAR Marshall PC mount Linear Pot
  • 220K Linear 24mm (B220K)
  • Nut included
    Marshall 24mm Pot Dimensions
    		• $ 3.99   Marshall PC mount Linear 220k Pot
    larger image
    GN220KA24-MAR Marshall PC mount Audio Pot
  • 220K Audio 24mm (A220K)
  • Nut included
    Marshall 24mm Pot Dimensions
    		• $ 3.99   Marshall PC mount Audio 220k Pot
    larger image
    GN1MA24-MAR Marshall PC mount Audio Pot
  • 1M Audio 24mm (A1M)
  • Nut included
    Marshall 24mm Pot Dimensions
    		• $ 3.99   Marshall PC mount Audio 1M Pot
    larger image
    GN4D7KL24-MAR Marshall PC mount Linear Pot
  • 4.7K Linear 24mm (B4.7K)
  • Nut included
    Marshall 24mm Pot Dimensions
    		• $ 3.99   Marshall PC mount Linear 4.7k Pot
    larger image
    GN4D7KA24-MAR Marshall PC mount Audio Pot
  • 4.7K Audio 24mm (A4.7K)
  • Nut included
    Marshall 24mm Pot Dimensions
    		• $ 3.99   Marshall PC mount Audio 4.7k Pot
    larger image
    GN100KL24-MAR Marshall PC mount Linear Pot
  • 100K Linear 24mm (B100K)
  • Nut included
    Marshall 24mm Pot Dimensions
    		• $ 3.99   Marshall PC mount Linear 100k Pot
    larger image
    GN100KA24-MAR Marshall PC mount Audio Pot
  • 100K Audio 24mm (A100K)
  • Nut included
    Marshall 24mm Pot Dimensions
    		• $ 3.99   Marshall PC mount Audio 100k Pot
    larger image
    GN1MPP24-MAR Marshall Push/Pull PC mount Audio Pot
  • 1M Push/Pull 24mm (A1M)
  • Nut included
    		• $ 15.99   Marshall PC mount Audio 1M Push/Pull Pot
    larger image    		 No Longer Available
    Model Product Description Price . . Purchase
    Marshall 16mm Pots     Top of Page
    GN1MA16-MAR Marshall 1M Audio Pot
  • 1 Meg Audio (A1M)
  • 16mm case diameter
  • 7mm threaded bushing
  • Nut & Washer included
    Marshall 16mm Pot Dimensions
    		• $ 3.99   Marshall 1M Audio Pot
    larger image
    GN100KA16-MAR Marshall 100K Audio Pot
  • 100K Audio (A100K)
  • 16mm case diameter
  • 7mm threaded bushing
  • Nut & Washer included
    Marshall 16mm Pot Dimensions
    		• $ 3.99   Marshall 100K Audio Pot
    larger image
    GN220KL16-MAR Marshall 220K Linear Pot
  • Linear 220K (B220K)
  • 16mm case diameter
  • 7mm threaded bushing
  • Nut & Washer included
    Marshall 16mm Pot Dimensions
    		• $ 3.99   Marshall 220K Linear Pot
    larger image
    GN100KL16-MAR Marshall 100K Linear Pot
  • Linear 100k (B100K)
  • 16mm case diameter
  • 7mm threaded bushing
  • Nut & Washer included
    Marshall 16mm Pot Dimensions
    		• $ 3.99   Marshall 100K Linear Pot
    larger image
    GN50KL16-MAR Marshall 50K Linear Pot
  • Linear 50K (B50K)
  • 16mm case diameter
  • 7mm threaded bushing
  • Nut & Washer included
    Marshall 16mm 50KL Dimensions
    		• $ 3.99   Marshall 50K Linear Pot
    Marshall 16mm 50KL Zoom
    GN22KL16-MAR Marshall 22K Linear Pot
  • Linear 22K (B22K)
  • 16mm case diameter
  • 7mm threaded bushing
  • Nut & Washer included
    Marshall 16mm Pot Dimensions
    		• $ 3.99   Marshall 22K Linear Pot
    larger image
    GN10KL16-MAR Marshall 10K Linear Pot
  • Linear 10K (B10K)
  • 16mm case diameter
  • 7mm threaded bushing
  • Nut & Washer included
    Marshall 16mm Pot Dimensions
    		• $ 3.99   Marshall 10K Linear Pot
    larger image    		 Out Of Stock
    GN4K716-MAR Marshall 4.7K Linear Pot
  • Linear 4.7K (B4.7K)
  • 16mm case diameter
  • 7mm threaded bushing
  • Nut & Washer included
    Marshall 16mm Pot Dimensions
    		• $ 3.99   Marshall 4.7K Linear Pot
    larger image
    GN10KRL16-MAR Marshall 10K Linear Dual Reverse Pot
  • Linear 10K (B10K)
  • 16mm case diameter
  • 7mm threaded bushing
  • Nut & Washer included
    		• $ 7.99   Marshall 10K Linear Dual Reverse Pot
    larger image
    Model Product Description Price . . Purchase
    KORG 11mm Pots     Top of Page
    GNVKG-10KA-KRG Korg / Marshall 10K Audio Pot
  • Audio 10K (A10K)
  • 11mm , 6mm D-Shaft
  • Nut included
    		• $ 5.99   Korg 10K Audio Pot 11mm
    larger image
    GNVKG-100KA-KRG Korg / Marshall 100K Audio Pot
  • Audio 100K (A100K)
  • 11mm , 6mm D-Shaft
  • Nut included
    		• $ 5.99   Korg 100K Audio Pot 11mm
    larger image
    GNVKG-200KA-KRG Korg / Marshall 200K Audio Pot
  • Audio 200K (A200K)
  • 11mm , 6mm D-Shaft
  • Nut included
    		• $ 5.99   Korg 200K Audio Pot 11mm
    larger image
    GNVKG-500KA-KRG Korg / Marshall 500K Audio Pot
  • Audio 500K (A500K)
  • 11mm , 6mm D-Shaft
  • Nut included
    		• $ 5.99   Korg 500K Audio Pot 11mm
    larger image
    GNVKG-1M-KRG Korg / Marshall 1M Audio Pot
  • Audio 1M (A1M)
  • 11mm , 6mm D-Shaft
  • Nut included
    		• $ 5.99   Korg 1M Audio Pot 11mm
    larger image    		 Currently Unavailable
    GNVKG-5KL-KRG Korg / Marshall 5K Linear Pot
  • Linear 5K (B5K)
  • 11mm , 6mm D-Shaft
  • Nut included
    		• $ 5.99   Korg 5K Linear Pot 11mm
    larger image
    GNVKG-10KL-KRG Korg / Marshall 10K Linear Pot
  • Linear 10K (B10K)
  • 11mm , 6mm D-Shaft
  • Nut included
    		• $ 5.99   Korg 10K Linear Pot 11mm
    larger image
    GNVKG-20KL-KRG Korg / Marshall 20K Linear Pot
  • Linear 20K (B20K)
  • 11mm , 6mm D-Shaft
  • Nut included
    		• $ 5.99   Korg 20K Linear Pot 11mm
    larger image
    GNVKG-100KL-KRG Korg / Marshall 100K Linear Pot
  • Linear 100K (B100K)
  • 11mm , 6mm D-Shaft
  • Nut included
    		• $ 5.99   Korg 100K Linear Pot 11mm
    larger image
    GNVKG-200KL-KRG Korg / Marshall 200K Linear Pot
  • Linear 200K (B200K)
  • 11mm , 6mm D-Shaft
  • Nut included
    		• $ 5.99   Korg 200K Linear Pot 11mm
    larger image
    Model Product Description Price . . Purchase
    Marshall BIAS Pots     Top of Page
    GN22KBIAS-MAR Marshall 22K Linear Bias/Trim Pot
  • For JMP
    		• $ 4.99   Marshall 22K Linear Bias/Trim Pot
    larger image    		 No Longer Available
    GN22KBIAS2011-MAR 22K Linear Bias/Trim Pot
  • New version as of 2011
    		• $ 4.99   Marshall Linear Bias Pot
    larger image

    Model Product Description Price . . Purchase
    Marshall Amp Knobs     Top of Page
    GNORSCR-MAR8 Marshall Original Amp Knobs - Gold Top (set 8)
  • Dark Brown Base with Set Screw
  • Marshall Packaging
    		• $14.99   Marshall Amp Knob
    larger image     		Discontinued
    GNORPSH-MAR8 Marshall Original Amp Knobs - Gold Top (set 8)
  • Dark Brown Base Push On
  • Marshall Packaging
    		• $14.99   Marshall Amp Knob Push On
    larger image
    GN3298KN-GMAR2 Generic Marshall Amp Knobs Gold Top 2pc
  • Dark Base with Allen Set Screw
  • Brass inset sleeve
  • Generic
    		• $4.99   Marshall Amp Knob
    larger image
    GN340KN_MAR1 Marshall Style Amp Knob - Gold Top (single)
    Set Screw Black Bottom slightly taller than original
  • Height = 3/4"
  • Width at base = 3/4"
  • Shaft = 1/4"
    •      		$2.99   Tall Marshall Amp Knob Gold Top
    larger image
    GN342KN-MAR1 Marshall Style Amp Knob - Silver Top (single)
    Set Screw Black Bottom slightly taller than original
  • Height = 3/4"
  • Width at base = 3/4"
  • Shaft = 1/4"
    •      		$2.99   Marshall Amp Knob
    larger image
    GN343KN-MAR1 Marshall Style Amp Knob - Silver Top (single)
    Push On Black Bottom slightly taller than original
  • Height = 3/4"
  • Width at base = 3/4"
  • Shaft = 1/4"
    •      		$2.99   Marshall Amp Knob
    larger image

    Model Product Description Price . . Purchase
    Marshall Jacks     Top of Page
    GN530AM-MAR Marshall Amp Input Jack
  • PC mount 6 terminals
  • Marshall part# J2071
    Measurements
    		• $7.99   Marshall Jack 6 PC mount terminals
    larger image     		Discontinued by Marshall
    GN531AM-MAR Marshall MG Series Input Jack
  • Marshall Part # J1032 - HTJ-064-11I
  • PC Mount 3 terminals
    		•  $5.99   Marshall Amp Jack 3 PC mount terminals
    larger image    		 Out Of Stock
    GN532AM-MAR Marshall Amplifier Jack
  • PC mount , Stereo
  • 3 Terminals
    		• $5.25   Marshall Jack 4 PC mount terminals 
    larger image    		 see GN532AAM-GEN
    GN532AAM-GEN Generic Marshall Replacement Jack
  • PC mount , Stereo
  • 3 Terminals
    		• $3.49   Marshall Jack 3 PC mount terminals 
    larger image

    GN103AEL-MON 1/4" Mono Input Jack PCB Mount Plastic Nut
  • Cliff, 4 Terminal , Mono
  • used in Marshall, Ampeg, Crate and others.
    		• $2.29   PCB Mount Mono Input Jack
    larger image     		Out Of Stock
    GN502EL-MON 1/4" Mono Input Jack w/Plastic Nut
  • 4 Solder Terminals Switched
  • Used in many modern Marshall Amps
    		• $2.29   4 Terminal Mono Input Jack
    larger image
    GNH5NEL-NTW Black Plastic Nut for Cliff Jacks:
  • GN103AEL-MON / GN104AEL-STE / GN502EL-MON
  • Used in Marshall, Ampeg, Crate and others
    		• $.99   PCB Mount Mono Input Jack
    larger image
    GN800AM-MAR Marshall Switchable Jack Plate
  • Stereo/Mono speaker cabinets
  • Pre-wired for 2 - 8ohm speaker Loads
  • Stereo = 2 x 8 ohm
  • Mono = 4 or 16 ohm
    Back Image    |    Measurements
    		• $89.99   Marshall Jackplate 
    larger image    		 Out Of Stock
    GN801AM-MAR Marshall Speaker Jack Plate (no switch)
    Stereo/Mono speaker cabinets
  • Pre-wired for 2 - 16ohm speaker Loads
  • Stereo = 2 x 16 ohm
  • Mono = 8
    Back Image    |    Measurements
    		• $59.99   Marshall Jackplate
    larger image

    GN150AM-MAR Marshall Speaker Jack Cup
  • for mono single speaker jack
  • Jack and wires not included
     Back Image    |    Measurements
    		• $10.99   Marshall Jack Cup
    larger image

    Model Product Description Price . . Purchase
    Marshall Amp Switches     Top of Page
    GNH491AM-MAR Lighted Marshall Power Switch
  • JCM and others
  • 1 3/16" (H) x 1" (W)
    Back of Switch
    		• $ 6.99   Marshall Amp Power Switch
    Larger image
    GNH490AM-MAR Black Marshall Standby Switch
  • JCM and others
  • 1 3/16" (H) x 1" (W)
    Back of Switch
    		• $ 4.99   Marshall Amp Standby Switch
    Larger Image
    GNH489AM-MAR Black Marshall Rocker Switch
  • MG Power Switch - 4 tab
  • 21 (H) x 15mm (W)

    * Marshall has discontinued this switch
    * See GNH561AM-CAR for 4 Lug DPST

    		• $ 4.99   Marshall MG Power Switch
    Larger Image     		Discontinued
    GNH561AM-CAR Carling Marshall MG Style Power Switch
  • Black DPST Mini Rocker Switch
  • 0.51" x 0.76" mounting hole
  • .187" tabs , 5A, 125 VAC

    * generic substitute for GNH489AM-MAR

    		• $ 4.99   Carling Marshall Style Mini Switch
    Model Product Description Price . . Purchase
    Marshall Amp Logos     Top of Page
    GN6LOG-MAR 6" Marshall Plastic White Logo
  • Marshall Nameplate Part # C6B64002K
    		• $ 14.99   Marshall Plastic White Logo 6 inch
    GN9LOG-MAR 9" Marshall Plastic White Logo
  • Marshall Nameplate Part # C6B64003K
    		• $ 17.50   Marshall Plastic White Logo 9 inch
    GN11LOG-MAR 11" Marshall Plastic White Logo
  • Marshall Nameplate Part # C6B66004K
    		• $ 21.99   Marshall Plastic White Logo 11 inch
    GN6GLOG-MAR 6" Marshall Plastic Gold Nameplate Logo
  • White Plastic with Gold Plating on top
  • Used on many 60's models
    Marshall 6" Logo measurements
    		• $ 28.99   Marshall 6 inch Gold Logo
    GNLBDG-MAR Marshall JCM 900 Lead Plate Gold
  • 3 3/8" x 1 1/8"
    		• $ 5.99   Marshall JCM 900 Lead Plate, Gold
    larger image
    GNVBDG-MAR Vintage 1960 Marshall Badge Gold
  • 3 3/8" x 1 1/8"
    		• $ 5.99   Marshall Vintage 1960 Badge Gold
    larger image
    GNCBDG-MAR Marshall 1960 Classic Badge Gold
  • 3 3/8" x 1 1/8"
    		• $ 8.99   Marshall 1960 Classic Badge Gold
    larger image
    Model Product Description Price . . Purchase
    Cabinet Parts     Top of Page
    GNH252AM-MAR Marshall Amp Sprung Feet 2pc $ 13.99   Marshall Sprung Feet
    larger image
    MSHL Marshall Large Amp Strap
  • Genuine Marshall Handle
  • Black with Black Caps
    		• $ 12.99   Marshall Amp Strap Handle
    larger image
    GNH296AM-MAR Marshall Speaker Cabinet Handle
  • Genuine Marshall Plastic Recessed Handle
  • 6.19" x 10.63" Outer Measurement
  • Black w/Marshall Logo
    		• $ 34.99   Marshall Speaker Cabinet Handle
    larger image
    GNH322AM-MAR Marshall Speaker Cabinet Handle 1960HW
  • Marshall Metal Recessed Handle
  • for new hardwired cabinets
    		• $ 27.99   Marshall Speaker Metal Cabinet Handle
    larger image
    GNW05AM-MAR Marshall Caster & Socket 1pc
  • Steel Frame, black hard rubber wheel
  • for Marshall 412 cabinets
  • screws not included
    		• $ 22.99   Marshall Speaker Cabinet Caster
    larger image
    Model Product Description Price . . Purchase
    Marshall Fuse Holders     Top of Page
    GN200AM-MAR Marshall Amp Fuse Holder
  • Fits chassis hole sizes 5/8" - 11/16"
  • Length = 1 3/4"
    		• $ 4.99   Marshall Fuse Holder
    Marshall Fuse Holder Zoom
    GN204AM-MAR Marshall Fuse Cap 900 Series Amp
  • Inside Diameter = 6mm
  • Outside Diameter = 10mm
  • Length = 15mm
  • Fits GMA size fuses 5mm x 20mm
    		• $ 5.99   Marshall 900 Fuse Cap
    Marshall Fuse Cap Zoom
    GNVOLTSEL-MAR Marshall Voltage Selector
  • Modern Style 110/220/230
  • screw spacing 1.50" (1+1/2")
  • hole required 1.125" (1+1/8")
    Rear View
    		•  $ 35.99   Marshall Volt Selector
    larger image
    GNW124AM-012 Marshall Style 3 prong 12' Ac Cable
  • 1 male end, 1 female end
    		• $ 8.99   Marshall AC Cable 12ft
    Model Product Description Price . . Purchase
    Marshall OHM Selectors     Top of Page
    GN502AM-MAR Marshall Vintage Type ohm selector
  • male part replacement
  • 9mm point to point
    		•  $ 11.99   Marshall Ohm Selector
    larger image
    GNOHMSEL-MAR Marshall Impedance Selector
  • Rotary Switch 4/8/16
  • screw spacing 1.50" (1+1/2")
  • hole required 1.125" (1+1/8")
    Rear View
    		•  $ 23.99   Marshall Ohm Selector
    larger image
    MARSHALL TRANSFORMERS                

    * We order transformers per order, please allow 7-10 business days for delivery *

    - NO International Shipping -

    Make sure you know what transformer is right for you. Installation of the wrong transformer can severely damage an amp.
    The amount of power running thru a transformer is extremely dangerous. Always have installation done by a qualified technician.
  • ALWAYS MAKE SURE THE AMP IS NOT PLUGGED IN BEFORE ATTEMPTING REPAIR!
  • TUBE AMPS PRODUCE DANGEROUS AMOUNTS OF CURRENT
  • CAPACITORS CAN STORE ELECTRICITY AFTER THE AMP IS OFF
  • MAKE SURE CAPACITORS ARE DRAINED BEFORE ATTEMPTING REPAIRS

    * * IF YOU ARE NOT SURE SEEK OUT A QUALIFIED TECHNICIAN, HE'S A LOT CHEAPER THAN A FUNERAL! * *

    • Model Product Description Price . . Purchase
    Marshall Output Transformers     Top of Page
    GN050OT-MAR Marshall Replacement Output Transformer 50W

    Built to vintage specs with exact interleave ratios and materials. Great for upgrading later issue MarshallTM amps. Gives great classic sound. Good replacement for JMP and JCM 800's. For EL34!
    Mounting centers are 2.50" x 2.50"

    		 $109.95   Marshall 50 watt Output Transformer

    GN0100OT-MAR Marshall Replacement Output Transformer 100W

    Built to vintage specs with exact interleave ratios and materials. Great for upgrading later issue MarshallTM amps. Gives great classic sound. Good replacement for JMP and JCM 800's. For EL34!
    Mounting centers are 3" x 3"

    		$119.95   Marshall 100 watt Output Transformer

    GNJTM45OT-MAR Marshall JTM45 Output Transformer

    MarshallTM output transformer. For JTM45

     

    		 $103.95   Marshall JTM45 Output Transformer

    GN9100OT-MAR Marshall JCM900 Output Transformer 100W

    MarshallTM 100 watt output transformer. For Marshall JCM900

     

    		 $234.95   Marshall JCM900 100 watt Output Transformer

    GN9500OT-MAR Marshall JCM900 Output Transformer 50W

    MarshallTM 50 watt output transformer. For JCM900.

    		 $103.95   Marshall JCM900 100 watt Output Transformer

    GNJTM30OT-MAR Marshall JTM30 Output Transformer 30W

    MarshallTM 30 watt output transfomer. For JTM 30.

    		$107.95   Marshall JTM30 Output Transformer

    . .
    * We order transformers per order, please allow 7-10 business days for delivery *
    Make sure you know what transformer is right for you. Installation of the wrong transformer can severely damage an amp.
    The amount of power running thru a transformer is extremely dangerous. Always have installation done by a qualified technician.
  • ALWAYS MAKE SURE THE AMP IS NOT PLUGGED IN BEFORE ATTEMPTING REPAIR!
  • TUBE AMPS PRODUCE DANGEROUS AMOUNTS OF CURRENT
  • CAPACITORS CAN STORE ELECTRICITY AFTER THE AMP IS OFF
  • MAKE SURE CAPACITORS ARE DRAINED BEFORE ATTEMPTING REPAIRS

    * * IF YOU ARE NOT SURE SEEK OUT A QUALIFIED TECHNICIAN, HE'S A LOT CHEAPER THAN A FUNERAL! * *

    • Model Product Description Price . . Purchase
    Marshall Power Transformers     Top of Page
    GNJTM30PT-MAR Marshall JTM30 Power Transformer 30W
    Marshall 30 watt power transfomer. For JTM 30.
    Primary can be wired Parallel for 120V or series for 240V     		$119.95   Marshall JTM30 Power Transformer Out Of Stock
    GNT290LX-MAR Power Transformer for Marshall JTM45
    Hammond Transformer , 120V primary
    Mounting centers are 2.50" x 3.11"     		$199.95   Marshall JTM45 Power Transformer

    GN9100PT-MAR Marshall JCM900 Power Transformer, 100W

    MarshallTM power transformer. For JCM900 100W.

    		 $179.95   Marshall JCM900 100 watt Power Transformer

    GN950PT-MAR Marshall JCM900 Power Transformer, 50W

    MarshallTM50 watt power transformer. For JCM900.

    		 $149.95   Marshall JCM900 50 watt Power Transformer Currently unavailable
    GNP100PT-MAR Marshall JMP / JCM800 Power Transformer, 100W

    100 watt replacement power transformer for Marshall. Built to vintage specs with exact interleave ratios and materials. Great for upgrading later issue Marshall amps. Gives great classic sound. Good replacement for JMP and JCM800's. For EL34!

    		$135.95   Marshall JCM800 Power Transformer
    larger image

    GNP50PT-MAR Marshall JMP / JCM800 Power Transformer, 50W

    50 watt power transformer. Built to vintage specs with exact interleave ratios and materials. A good upgrade for later issue Marshall amplifiers. Good replacement for JMP and JCM 800's. For EL34!
    Mounting centers are 3.25" x 3.25"

    		$131.95   Marshall JCM800 Power Transformer

    Model Product Description Price . . Purchase
    Marshall Chokes     Top of Page
    GNC194C-HAM Hammond Filter Choke for JCM800
  • Hammond filter choke for Marshall JCM800
    spec sheet
    		• $47.95   Hammond Filter Choke for Marshall JCM800
    larger image

    Visa Mastercard American Express Discover

    Buy instantly using your credit card thru PayPal's secure server or fill out our mail in order form.


    Shopping Cart Info  |   Shipping & Payment Info   |   Mail Order Form   |   International Orders

    Home  | Amp Parts  | Bridge Parts  | Electronics  | Hardware  | Knobs  | Nuts  | Pickguards
    Schematics  | Screws  | Strings  | Tools  | Tremolo Parts  | Tubes  | Tuners  | Accessories
    Bass Parts  | Bodies  | Necks  | Special Order Parts  | Used Parts

    Sales Email - sales@guitarnucleus.com  |   Tech Email - tech@guitarnucleus.com


    Guitar Nucleus Info Site  |   About Us  |   Site Map